WHITE SMOOTH UNCOATED VELLUM LABEL STOCK
Suggested Use – The substrate is suitable for direct thermal printing at various printers for mainly aviation, barcode, e-commerce, courier & logistics.
Conversion – The Label Stock is suitable for formats of printing technologies like thermal flexography, letterpress, offset & screen printing etc.
Shelf Life-2 years when stored at 50% RH & 24 °C
Disclaimer – In case of self-adhesive Label Stock, it is suggested that users should satisfy themselves with performance of the Label Stock under the specific application requirement condition.
Curved Dia – Flat & ≥ 35 mm
| HDPE | LDPE | PP | PET | Corrugated | Glass |
 |
 |
|
|
|
|
Product Description
COATED WHITE SEMI-GLOSS PAPER LABEL STOCK |
|||
|---|---|---|---|
| Face Stock | A white smooth uncoated vellum paper for barcode, DTP labels & marking labels 70 (± 5%) gsm | ||
| Thickness | 70 (±5%) micron | ||
| Release Liner | Glassine 60 gsm, solvent less silicone coated with platinum catalyst for smooth auto label dispensing | ||
| Thickness | 53 (±5%) micron | ||
| Release Value | Not more than 25 g / 25 mm | ||
| Adhesive | General purpose permanent emulsion acrylic adhesive featuring good initial tack and high bonding strength | ||
| Service Temp. | -20 °C (min) to 60 °C (max) | ||
| Application Temp. | Minimum 5 °C | ||
| Label Stock Thickness | 133 micron ± 10% | ||
Adhesive complies with US FDA Title 21 Code of Federal Regulations (C.F.R.)
Section 175.105 (Adhesives) indirect food contact.
Test Parameters
| Peel Strength | More than 1500 g/25 mm on steel (180°) at 300 mm per minute as per FTM-1 |
| Shear Strength | More than 1000 minutes with 1000 g weight |
| Roll Ball Value |
Maximum 20 mm |
Reviews
There are no reviews yet.