DIRECT THERMAL LABEL STOCK NON TOP COATED
Suggested Use – The substrate is suitable for direct thermal printing for industries
such as aviation, barcode, e-commerce, courier & logistics.
Conversion – The Label Stock is suitable for formats of printing technologies like
thermal and flexography.
Shelf Life – 2 years when stored at 50% RH & 24 °C
Disclaimer – In case of self-adhesive Label Stock, it is suggested that users should satisfy themselves
with performance of the Label Stock under the specific application requirement condition.
Curved Dia – Flat & ≥ 35 mm
| HDPE | LDPE | PP | PET | Corrugated | Glass |
 |
 |
|
|
|
|
Product Description
DIRECT THERMAL LABEL STOCK NON TOP COATED |
|||
|---|---|---|---|
| Face Paper | A white smooth non top coated direct thermal paper exhibiting good printability and convertibility, 75 (±5%) gsm | ||
| Thickness | 82 (± 5%) micron | ||
| Release Liner | Glassine 60 gsm, solvent less silicone coated with platinum catalyst for smooth auto label dispensing 53 | ||
| Thickness | (± 5%) micron | ||
| Release Value | Not more than 25 g / 25 mm | ||
| Adhesive | General purpose permanent emulsion acrylic adhesive featuring good initial tack and high bonding strength | ||
| Service Temp. | -20 °C (min) to 60 °C (max) | ||
| Application Temp. | Minimum 5 °C | ||
| Label Stock Thickness | 145 micron ± 10% | ||
Adhesive complies with US FDA Title 21 Code of Federal Regulations (C.F.R.)
Section 175.105 (Adhesives) indirect food contact.
Test Parameters
| Peel Strength | More than 1500 g/25 mm on steel (180°) at 300 mm per minute as per FTM-1 |
| Shear Strength | More than 1000 minutes with 1000 g weight |
| Roll Ball Value |
Maximum 20 mm |
Reviews
There are no reviews yet.